Moles ruining your lawn? Here's how to get rid of moles by trapping.
Would you like to speak to our readers? We offer sponsored articles and advertising to put you in front of our audience.
Find out more.
Moles are amazing creatures, but sometimes they are in the wrong place at the worng time.
Usd 8 may 19 moles
Time Well SpentDecember 19, 2022
Gardeners and landowners have been trying to get rid of moles for centuries. Apart from ruining the look of a cricket pitch or cherished lawn, molehills can be dangerous. A horse can stumble on one and dismount a rider.
The skills and knowledge of professional mole trappers are still used throughout the land and a good rural pest controller will have effective ways of dealing with moles.
Molehills can spring up virtually overnight
Get rid of moles yourself
But what if you want to DIY the task?
Here I will show you how to use traps for moles in a quick and efficient way and show you how to increase your catching rate. I’ve listed a couple of traps I would recommend trying. Of course, using traps is a non-toxic way of controlling moles without resorting to poison and a good trap set properly gives a humane kill.
The half-barrelled Duffus trap is easy to set and can catch two moles at a time
Using traps to get rid of moles
There are two main types of mole trap.
1. Scissor trap
This has has two spring-set scissor arms at each end of the trap, which the mole crosses only to be faced by a metal plate. On touching the plate the trap is sprung and the scissor arms close. The scissor trap is highly effective at catching moles but only catches one at a time. It is also visible to passers-by as it sits on the ground, which could provoke negative comments.
New traps need to smell as though they belong in the local habitat so need to be “seasoned”. Mole trappers have their own techniques they swear by, from planting them in the compost heap for two weeks to layering them in tea bags for two days. My technique is to place them in leaf litter for four days. This will get rid of any non-natural smells and means you don’t have to spend time burying and digging up traps. Don’t have a shower before trapping or splash on the aftershave because non-natural smells will scare anything off your traps.
Andy sets his traps near to the first molehill that runs into the field
How to set a mole trap
Firstly you need to understand how a mole works its tunnels. If you are trapping moles near or close to hedgerows and dry-stone walls, you will see there is a series of side runs going back to the hedgerow or wall and there will be a main run in the field. I get my best results from setting my traps near to the first molehill that runs in to the field. This is because the mole will rest up under these obstacles and come out to feed every four to six hours. The mole has to travel out of these tunnels to get to the main feeding tunnel system.
The next job is to find these tunnels using a probe. I use a very simple 2ft long 5mm steel rod with red electrical tape on one end, and I find the tunnels by pushing it into the ground between hills. You are feeling for a continuous pressure, then a break in the pressure when you are pushing the probe in. This is how you know you’ve found the tunnel system. These tunnels can be anything from 2 to 18in deep, depending on the soil type. I have known systems on heavy gravel soil to be 2in deep and only 6ft away; in light sandy soil to be 12in deep.
Once you have located the tunnel system you should dig down and uncover the system. Be as careful as possible because you don’t want to drop any loose soil back down the tunnel. Loose soil in the tunnel will result in failed sprung traps. This is due to the mole pushing loose soil on to the trigger point which will spring the trap before the mole has entered the trap.
I use an Eezyspring pigeon decoy stick to clean any unwanted soil from back down the tunnels, but any flat piece of steel roughly 2cm tall and 10cm long will do the trick. One end of the stick needs to be bent in to a ‘U’ shape to help hook the loose soil out from back down the system.
When digging the hole to put the trap in, I tend to use a trowel on lighter soil and a spade on tougher ground. My spade is a border spade and in width is 2in shorter than the trap, meaning the trap is a tight fit in the hole and only needs a light amount of padding in.
Once the trap is in the hole it is a good idea to make sure the trapping loop is just slightly pushing into the ground so that the mole does not feel it when it walks over it.
Once I have the trap in the correct position I will start to fill around the trap sides making sure not to drop any soil into the tunnel system. I try to use soil clumps around the sides and good sprinkling of light molehill soil on top of the trap. You don’t want to leave any light gaps, nor do you want the mole to sense a difference in air pressure from the lack of soil above. Ensure that you don’t place too much soil on the moving actions of the trap because it will hinder its effectiveness. Once I have the trap set and covered up I will place a marker. I tend not to use a marker on heavily populated areas, instead opting for a map record.
Use a marker once a trap has been set and covered up
Setting a mole trap
How often should I check a mole trap?
I check all my traps every day and follow a simple three-stage plan.
If a trap catches after day one I reset it and leave the traps that haven’t caught anything running
Day two: if any traps have not caught anything I move those to a new area
If I do not catch any further moles from a run after three days I will then remove that trap.
Listening for moles
Summary
I get rid of moles through trapping throughout the year and it can be difficult when you start out. However hopefully by passing on my experiences you will gain some valuable insight into mole catching best practice. Remember, to try and try again. If things don’t go to plan first time, think about what you have done and what you could try that’s different. Look at where the moles are active, the position of walls and hedgerows. Read the steps above – are you doing everything suggested? Learn from your mistakes, as there is nothing more satisfying than mastering a process.
To provide the best experiences, we use technologies like cookies to store and/or access device information. Consenting to these technologies will allow us to process data such as browsing behavior or unique IDs on this site. Not consenting or withdrawing consent, may adversely affect certain features and functions.
Functional
Always active
The technical storage or access is strictly necessary for the legitimate purpose of enabling the use of a specific service explicitly requested by the subscriber or user, or for the sole purpose of carrying out the transmission of a communication over an electronic communications network.
Preferences
The technical storage or access is necessary for the legitimate purpose of storing preferences that are not requested by the subscriber or user.
Statistics
The technical storage or access that is used exclusively for statistical purposes.The technical storage or access that is used exclusively for anonymous statistical purposes. Without a subpoena, voluntary compliance on the part of your Internet Service Provider, or additional records from a third party, information stored or retrieved for this purpose alone cannot usually be used to identify you.
Marketing
The technical storage or access is required to create user profiles to send advertising, or to track the user on a website or across several websites for similar marketing purposes.