The home of Shooting Times and Sporting Gun

BSA / SKB Model 200 12-bore

A Japanese-made BSA side-by-side is upmarket but this gun feels reassuringly familiar, says Lewis Potter


BSA / SKB Model 200 12-bore

Manufacturer: BSA

Price as reviewed: £400

The idea of a famous sporting arms maker subcontracting production to an overseas manufacturer is not new. In this instance, the phrase “made in Japan to BSA specification” has a ring to it that has echoed down through the years until such practice has become almost commonplace.

In the inter-war period, BSA made its own range of highly regarded side-by-sides, but the factory was badly damaged during World War II. Sadly, production of double-barrelled guns never resumed post-war, instead BSA concentrated on rifles and single-barrel shotguns. In the 1960s, to extend its range, it marketed a range of shotguns manufactured by SKB Arms Company based in Tokyo, which also had Browning and Weatherby on its books at different times. These included over-and-unders, semi-autos and the somewhat less common side-by-side.

Upmarket specification

Model designations bore number grading and this 200E sports a remarkably upmarket specification as a single selective trigger ejector gun. The walnut is sound, though not particularly fancy. The decoration around the action body and furniture is unusual in that it is raised up in relief rather than the more normal engraving, either by machine or hand, and cut into the steel.

The decoration on this SKB is quite eye-catching. The overall styling is that of an English side-by-side with its straight-hand stock and modest-sized fore-end. This gun had a centre bead part-way along the raised top rib, but it has been cut off flush, leaving the neat brass foresight bead, a modification that is an improvement.

So much about this shotgun is familiar, such as the Anson push rod fore-end release, the dowel pins through the action body, the shape of the top-lever and the nicely proportioned auto-safe button. As for the scroll-back styling to the action body, this is what you might expect on much more expensive English guns, along with the hand-cut flat-top chequering. Initially, there were some reliability problems and, with the first guns, stocks were a bit short. However, between BSA and SKB these matters were soon sorted out. In 1965 the Model 200 retailed at around £60, which was something of a bargain considering the specification.


The decoration around the action body is in relief

The differences

What would have been considered a little unusual at the time on a side-by-side is the monobloc barrel construction, with the band of faux engraving where the barrel spigots into the monobloc. The barrel selector is situated in the trigger, which is actually very effective but gives the appearance of some sort of trigger lock safety associated with cheaper guns.

The fore-end feels a bit flat underneath and the hand of the stock is also a little flattened either side of the trigger-guard tang (or tail). It is, though, a fairly light gun, barely 7lb loaded, and with the 28in barrels it balances well.


The Model 200E had all the ingredients to make it a winner, and the fine quality of manufacture is evident, even on a cursory examination. It is built in a familiar manner, it looks right and is choked quarter-and-half, which is a good compromise between the very open “game” boring and the tight chokes of many overseas competitors. However, it did not sell as well as the over-and-unders. It is a pity and these BSA/SKB side-by-sides are now not common, as they are an interesting addition to the history of sporting firearms.

What to look for when buying a secondhand BSA

Barrels:  The barrels are very strong and the bores chromes, so there are few problems
Action: Do the usual checks for the barrels being tight on the action with the fore-end removed
Weight: 6lb 14oz
Value: A good example circa £400, sound but scruffy around £150.