The home of Shooting Times and Sporting Gun

Steyr Zephyr II .17 HMR rimfire

The Zephyr II rifle combines traditional design with modern flair and is a breath of fresh air in the rimfire market, says Bruce Potts

Steyr Zephyr II 17 HMR rimfire

Steyr Zephyr II .17 HMR rimfire

Manufacturer: Steyr Mannlicher

Price as reviewed: £746

The original Steyr Zephyr was a .22 LR, produced in 1966 by Steyr Mannlicher, and it was unlike any other rimfire available at the time. It had that everlasting and alluring quality that Steyr rifles possess and 
it was the only rimfire I knew of 
that had a Stutzen — or full-length 
— stock. These are rare now and highly desirable.

Steyr has now revived the Zephyr rimfire, with a few changes. The Stutzen stock has gone, but this Sporter version looks very nice. 
The same barley-twist barrel 
profile remains, as does the 
well-engineered action 
design, and it is now available in .17 HMR, 
.22 LR and .22 WMR.

Retailing at £746, the Zephyr II, with 
its modern and Teutonic design, is 
a breath of fresh air 
in the rimfire market.

The Zephyr II’s styling is a blend of traditional bolt-action 
rimfire and more modern-
day flair. It is light at 5.8lb, which 
adds to the appeal. This, combined with a 14.25in length of pull, makes for good handling and a balanced and effortless grip.

Steyr Zephyr II .17 HMR rimfire

The Zephyr II has a barley-twist barrel profile, 100 per cent reliable bolt action and familiar magazine system

Visual appeal

  • The stock is walnut and has a nice semi-rubbed oil finish, which gives 
a practical as well as visual appeal. The walnut is light in colour, which suits this rifle, and the grain and figure are good enough to draw interest, but it is the styling that catches the eye. The wood is well scalloped to form finger holds, rests and interesting curves that give the Zephyr definite flowing lines.
  • The pistol grip is particularly well formed, having a long rake to it for effortless hold, and the trigger-blade is 3in from the front of the grip. It has a palm swell to the right and, as with the fore-end, possesses good laser-cut fish-scale chequering that grips well and looks classy. There is also a soft rubber recoil pad and swivel studs that, when tested, 
would only fit Steyr’s own loops.
  • The cheekpiece is typically German, a Bavarian double-line 
affair that flows back over the top 
of the pistol grip to the belly of the 
stock, forming a lip and good finger 
hold in the fore-end that terminates 
in a Schnabel tip. This all adds up to 
a handsome, great-handling stock, whichever way you look at it.
  • The action is marked ZR II and 
has a long bolt release and 11mm 
dovetails to fit a scope direct to the 
action top. Typically, Steyr utilises the 
traditional butter-knife bolt handle 
with a low travel and height. This 
is chromed for a slick operation and has twin extractor claws and a spur-type ejector that was 100 per cent reliable in the tests.
  • The trigger was gold anodised and had a long first travel then a small creep to second release of 3.85lb. 
It can be adjusted, but I left it and soon got used to it.
  • The safety is a tang type, which I like. The forward position shows a red dot, indicating the rifle is ready to fire, while the back position shows white, meaning it is safe.
  • The floor-plate and magazine system come straight from a CZ rifle. These are tried-and-tested parts and, as an added bonus, spare magazines are cheap too. The Zephyr comes with 
a five-shot magazine as standard.
  • The barrel is very well made, with the Steyr barley-twist barrel profile, and has the same matt-blued finish 
as the action. It is fully floated from the fore-end wood, comes screw cut with a ½in UNF thread and is 19.75in long.
  • The internal finish to the rifling was excellent.
Steyr Zephyr II .17 HMR rimfire

Walnut stock

To the bench

There are no reloads for the .17 HMR, so I tried a selection of factory brands in differing weights to find out what the Zephyr liked. The typical bullet weight is 17-gr and there are many 
to choose from, as well as the heavier 20-gr and lighter, lead-free 15.5-gr. Off the bench, the Zephyr shot really well — no real surprise with that hammer-forged hammer and precision rifling. With regard to accuracy, at 50 yards the five-shot groups were tiny. All the ammunition, regardless of weight, shot less than 0.75in — and some as small as 0.45in.

The Hornady 17-gr V-Max load 
is the industry-standard HMR — it started the .17 HMR pedigree after 
all. With a consistent 2,578fps for 251ft/lb, it shot amazing 0.35in 50-yard groups and 0.75in 100-yarders.

I like the heavier bullet and stronger construction of the CCI Game Point 20-gr. Good for foxes, this round is accurate too, with 0.45in 50-yard groups, a velocity of 2,427fps for 262ft/lb energy and good expansion from the hollowpoint design.

The Hornady NTX is the lead-free option and as such uses a lighter bullet at 15.5-gr due to its sintered bullet design. It is always accurate and in 
the Steyr it shot 0.50in 50-yard groups for 2,571fps and 228ft/lb energy.

Remington’s 17-gr AccuTip load 
too was dead on, with 0.55in groups 
and a healthy velocity of 2,566fps for 
249ft/lb energy. So, depending on 
the quarry you wish to hunt, there 
is an accurate round tested here 
for you.

Take the Zephyr, add a Hawke scope, Wildcat moderator and Hornady ammo and you have a superb vermin tool.

In the field

Befitting a Sporting arm designed for field use, 
I used a Wildcat Panther sound moderator. Its over-barrel design ensures that the weight — just 220g thanks to its aluminium construction — is well distributed and thus handling is not compromised. It also means the overall length is only 112mm in front of the barrel. And, of course, it is 
very effective for sound suppression.

I zeroed the Hawke Vantage scope at 0.5in high at 50 yards, so the trajectory was set as flat as possible — little adjustment for elevation was needed at any practical range to 125 yards. It pays to take a bit of time sighting in correctly and practising 
at varying ranges so you feel confident on live game in the field.

Usually the HMR’s duties entail 
a spot of rabbiting or fox control, but I had other ideas for the Zephyr II as 
a farmer was complaining of grey squirrels eating through grain 
sacks in his barn. Squirrels can be tough little critters to nail to the spot and the Zephyr II in .17 HMR would give me the accuracy I needed, as well as fast expansion, limiting the chance of ricochets.

In the high seat

With squirrels in barns, elevated shots are a no-no due to the bullet’s over-travel, so I chose to set up a folding high seat between the barn and the squirrels’ wooded home. It was seriously hot and uncomfortable, but it wasn’t long before I heard the telltale scurry of a squirrel down the blind side of the trees and then the quick scamper to the barn. But they weren’t stopping 
— and I can’t blame them.

To get the chance of a shot, 
I clenched my teeth and mimicked squirrel chatter with my tongue. This worked well for three out of 
five squirrels that fell to the Hornady 17-gr V-Max rounds; the trouble was, a sixth squirrel decided to use my tree as his barn run and so after 
a face-off and alarm call, that 
was that.


I liked the original Zephyr and I like this new version even better, as though the Stutzen stock has gone, it has been replaced by a better design in my view. The action is slick, the handling is good, cheap spare magazines are available and the accuracy was sublime. What’s not to like?

Accuracy: Superb with any brand of ammunition 19/20

Handling: Light and fast handling 18/20

Trigger: Needs a bit of adjustment 16/20

Stock: Good styling and ergonomics 18/20

Value: Good-value alternative in the .17HMR market



The Zephyr II is 
a breath of fresh air 
in the rimfire market.